Xoptiinside.com
Race bikes Only!!!
xopti inside
FL
United States
XOPTIMIZ
Data & Downloadable Programs
The 2008 and newer bikes will need TunerPro XDF files for tuning 1125r and 1125cr with ecmspy. To use these files with any ecm on any buell you will use the ecmread program.
Ecmspy Mono demo and all other data pertaining ecmspy mono will be found directly on the ecmspy.com website.
All data is hobby and not a job!
Factory stock and race files are Property to Buell.
please save your own stock data.Some of the files below are linked to the main directories, therefore at all times you will get the latest information.These Files are built from a group effort and are intended to be used as non commercial use only...In other words dont sell or use or make profits from the files contained on this website or the linking sites.More definition and more possibilities in tuning than any other system.
How to Install XL cams in your XB9 or Xb12
Instructional sheet download PDF file.
The Exclusive to Xoptiinside files below are used to connect the Tunerpro V5 to the bike for datalogs and read/write, download below.
Buell read /write plug-in to be able to change your ecm.
Tunerpro Rt Msq Fuel Map maker for Mega Log Viewer
FUEL DIFFERENCE EXCEL PAGE.XLSM
USE THIS XLSM PAGE TO SEE THE DIFFERENCE FROM ONE CYLINDER IN COUNT AND PERCENTAGE AS WELL TO PASTE FROM ONE FILE TYPE TO ANOTHER.
Unzip this plug in and place the dll file in the c:/drive where the Tunerpro rt v5 was installed.
You can run this in linux or ubuntu under wine if you choose. Even run it in boot-camp or virtual box in mac. Your not locked to windows.
These were created exclusively for free use non commercial use. Using these outside their intended use violates not only ecmspy but the Tunerpro Gui as well.
AN ADX is required to datalog and see live data.
DDFI 1 1998-2002 ADX File date July 25 2010
DDFI 2 2003-2007 ADX File date July 24 2010
DDFI 3 2008 - UP ADX File date OCT 9 2010
ADX files are also on the ECMSPY website, however, they do not contain history or dashboards. Use these to model from to add that to those.
Note: If your connection is connected but it has erratic data follow the steps below to attain a precise connection with little error.
If you get a flashing blue/red connect or a pink connecting box in the lower center of the screen you need to adjust the payload and body size. You can edit as in the pic below. This is due because some of the ecms have different data counts on the data base made from the factory. Therefore some adjustment is needed on some ecms. You may need to lower this number or raise it to get connection. On each change click save, then re click the two blue left right arrows. Re-Pete these steps until the connection is accomplished.
We are continuing updates to these linking files, so check back regularly for the latest version. This system uses the cables available at
Selling or promoting this product, files or attachment items outside its intended use is prohibited and will not be tolerated.
Promoting this product, files or cable usage without written consent is against the Company Policy as well and subject to disciplinary action.
xopti inside
FL
United States
XOPTIMIZ
